purpose of ballast resistor sorted by
relevance

Admin21.07.2021

Heavy

What is a Ballast Resistor and what does it do and why? Electronic ignition systems, whether factory Mopar or aftermarket, don't utilize breaker points, thereby not actually needing a ballast resistor to control amperage through the pickup coil.
6501
Admin25.06.2021

What is the purpose of the ballast resistor

Typically lowers current 3,000 RPM by about 0.
7207
Admin22.06.2021

What Does a Ballast Resistor Do?

When cranking, the starter motor draws a lot of current and can drop system voltage to the point that the spark could be pretty weak but the resister is temporarily bypassed so the coil sees full system voltage and produces a nice fat spark.
3407
Admin16.06.2021

Symptoms of a Bad or Failing Ballast Resistor

Posted 2010-09-08 9:42 AM 240260 - in reply to 240235 Subject: Re: Ballast? I haven't looked into these "special" 12 volt coils to see if they have an internal ballast, or simply more primary windings to keep the resistance up and the current to the points and coil down.
4007
Admin19.07.2021

Heavy

I would suggest you use an "E-core" coil such as is found in the late Ford TFI electronic ignition system.
2109
Admin06.08.2021

Chrysler Electronic Ignition

Note the voltage, which should be approx 12.
6206
Admin06.07.2021

What is the function of ballast resistor?

If the ballast resistor is not working properly, the vehicle will not start.
5408
Admin01.07.2021

Chrysler Electronic Ignition

4 Ohms is ideal for our systems Which coil should I use if my car has a ballast resistor? This article is the first from the basic electronics series.
2602
Admin11.08.2021

Heavy

You can send me mail at:.
9206